Clamp For optical fiber cables type ADSS PA01,02,05
The type of ADSS PA01,02,05Anchoring Clamp For optical fiber cables Short spans < 100 m, or
according to line system ADSS anchor clamps are made of * Flexible
stainless steel bail * Fiber glass reinforced, UV resistant plastic
body and wedges The stainless steel bail allows installations of
clamps on pole bracket. All the assemblies passed the tensile
tests, operation experience with temperatures ranging from –60 °C
up to +60 °C test, temperature cycling test, aging test, corrosion
resistance test etc
Description of anchor clamp wedge type
Anchor clamp wedge type for ab cable service line.The tension clamp
for opgw is designed to anchor insulated service lines with 2 or 4
conductors to the pole or wall. The tension clamp for opgw is
composed of a body, wedges and removable and adjustable bail or
pad. One core wire anchor electrical clamp are design to supporting
the neutral messenger,the wedge can be self-adjusting. Pilot wires
or street lighting conductor are led alongside the anchoring clamp
for optical fiber cables.The self opening is featured by an
integrate spring facilities for easily insert the conductor into
the clamp. Standard: NFC 33-042.
Material of dead end clamp for ab cable
The clamp body, the main mechanical component is manufactured in
heavy duty weatherproof synthetic material.
The wedge, made from synthetic material exerts necessary mechanical
pressure in retaining the cable in the body of the clamp.
The pull hook is made from anti corrosion rod.
For anchoring isolated coaxial and unipolar cables.
Feature of tension clamp
1.Simple and fast installation requiring no tools.
2.Suits to all field configurations.
3.Possible to mount on pole line hardware with open or closed eye.
4.Mechanical traction resistant.
5.Supports industrial duty tension.
For the correct installing cable dead end clamp, the following
steps are recommended:
- Loosen the mooring hook from the anchor clamp.
- Place the hook en the place to be mooring point or support, fixing
it inside the body of the clamp
- Remove the wedge from its base and then place the cable within the
- Replace the wedge to its corresponding position and proceed to
tense the cable taut.
Anchoring clamp hs code: 8538900000
Anchoring Clamp For optical fiber cables type ADSS PA01,02,05
|Min Tension (daN)||100-300||100-300||200-500||200-500|